hot led dynamo solar bicycle flashlight

Description:

led dynamo solar bicycle light
1.use 3 high brightness straw hat LEDs
2.charged by cranking or solar energy
3.Energy saving!Led dynamo solar bicycle light charged bycranking or solar energy!  Green and environmentprotection!  Features:1, Cranking for power, low noise but highefficiency.2, Absorb solar energy for power, green andenvironment protection.3, Ultra bright lighting.4, Controlled by electric switch, longlife-span.5, Newfangled design which can charge the lightby cranking, energy saving     and no pollution.Need no batteries.6, Newfangled design which can be used onthe bicycle.  1) Main Technical Parameters:

The Max. Luminous flux	≥12 Lm
The Max. beam luminous intensity	≥ 50000mcd
Lighting time after 1 minute cranking	≥15 Minutes
Lighting time after 30mins charging by light energy	≥10 Minutes
Lighting time after full charged	≥2.5hours
Lighting distance(Center point luminous intensity0.2lux)	≥10m
Charging/discharging circle	≥500 times
The Max.power output of the brushless generator	≥2.5w
LED lifetime	≥100000 Hours
Main body material	ABS

 2) Main parts life-span:

Switch	≥10000 Times
The whole unit	≥5 Years
The plastic part	≥5 Years

 3) Size and Weight:

Product size	86x44.3x36mm
Product weight	80.2g

 4) Others:

Specification of built-in battery	Chargeable lithium battery Lir2032 :3.6V40mAh
Solar Panel:	5.4v, 5mAh amorphous silicon cell panel

 Charging operation:1,  Crank to charge its inside battery: holdthe unit and crank the handle by the other hand at the speedof 3 circles per second to charge its inside battery.2, Put the flashlight in the sunlight, it willcharege its inside battery automatically.

 

[Packing]
1pc/white box, Meas.:28*24*43CM/100pcs
G.W./N.W.: 10.5/9.5KGS

 

 

 

 

 

hot led dynamo solar bicycle flashlight